CASTABLE ABUTMENTS
PLASTIC CASTABLE ABUTMENT
Screw included
 |
||
| RP | RA-PH | RA-PHR |
| Height |  9.5 mm |
 9.5 mm |
| Type | Hex | Rotational |
| Ncm | 15 Ncm | 15 Ncm |
| Ø mm | Ø 4.0 mm | Ø 4.0 mm |
Plastic Castable abutments are intended for use by the technician for simple casting of custommade abutments for constructing the prosthetic restoration.
CASTABLE ABUTMENT WITH Co-Cr BASE
Screw included
 |
|
| RP | RA-PHC |
| Height | 9.5 mm |
| Type | Hex |
| Ncm | 15 Ncm |
| Ø mm | Ø 4.0 mm |
The Casting abutment with CoCr base is made out of Chrome Cobalt. Casting abutments with pressfit plastic sleeve are used for customized prosthetic restorations.
CASTABLE ABUTMENT WITH TITANIUM BASE
Screw included
 |
|
| RP | RA-PHT |
| Height | 11.0 mm |
| Type | Hex |
| Ncm | 15 Ncm |
| Ø mm | Ø 4.0 mm |
Plastic Castable Abutments on Titanium Bases enable the dental laboratory to cast on an accurate Titanium base. The machined Titanium base provides an accurate fit to the implant.
CASTABLE ABUTMENT WITH TITANIUM BASE
Screw included
 |
||||
| RP | RA-PCS01 | RA-PCS02 | RA-PCS03 | RA-PCS04 |
| Abutment Height | 9.5 mm | 10.5 mm | 11.5 mm | 12.5 mm |
| Collar Height | 1.0 mm | 2.0 mm | 3.0 mm | 4.0 mm |
| Type | Hex | Hex | Hex | Hex |
| Ncm | 15 Ncm | 15 Ncm | 15 Ncm | 15 Ncm |
| Ø mm | Ø 4.8 mm | Ø 4.8 mm | Ø 4.8 mm | Ø 4.8 mm |
ANGULATED ANATOMIC CASTABLE ABUTMENT
Screw included
15° |
||||
| RP | RA-PCS1501 | RA-PCS1502 | RA-PCS1503 | RA-PCS1504 |
| Abutment Height | 8.5 mm | 9.5 mm | 10.5 mm | 11.5 mm |
| Collar Height | 1.0 mm | 2.0 mm | 3.0 mm | 4.0 mm |
| Type | Hex | Hex | Hex | Hex |
| Ncm | 15 Ncm | 15 Ncm | 15 Ncm | 15 Ncm |
| Ø mm | Ø 4.8 mm | Ø 4.8 mm | Ø 4.8 mm | Ø 4.8 mm |
Screw included
25° |
||||
| RP | RA-PCS2501 | RA-PCS2502 | RA-PCS2503 | RA-PCS2504 |
| Abutment Height | 8.5 mm | 9.5 mm | 10.5 mm | 11.5 mm |
| Collar Height | 1.0 mm | 2.0 mm | 3.0 mm | 4.0 mm |
| Type | Hex | Hex | Hex | Hex |
| Ncm | 15 Ncm | 15 Ncm | 15 Ncm | 15 Ncm |
| Ø mm | Ø 4.8 mm | Ø 4.8 mm | Ø 4.8 mm | Ø 4.8 mm |
